Where do we begin with this one? – Here is your ticket and before you go to the next section of this post, make sure you have a quick answer. The Ticket/Challenge **Trying not to call it a problem! Your client needs to move from a Datacenter to a new location. You need to move […]
CUCM – Moving CUCM Publisher – Change IP address Read More »
Passing the CCIE Collaboration Lab was really hard and a very nice and entertaining experience, which I feel very happy to say that I completed the challenge!! I will be very short on this post and will make it technical and a bit emotional for the people out there that may benefit from it at
Finishing an upgrade project after being a while since doing one, I wanted to take the time to share the experience and how easy has Cisco made it into upgrading their software. It may look a bit disorganized, but you will find few things that I used to refresh my memory on the process, but
CUCM upgrade from 9.x to 11.x – Short post Read More »
We are UC/Collaboration guys and if you are like me, Exchange 2013 is not your expertise… but if you are handy with Exchange 2013 that is great, and maybe you can use the following post useful too. Single Inbox Unity Connection 9.x Exchange 2013 Here are some useful links that I have found in order
Single Inbox Unity Connection 9.x Exchange 2013 Read More »
Yes, another upgrade and more with it. This one was very special and I was totally blaming myself after the TAC engineer helped me figure it out. I was always told, or I remember it was good practice to always get the latest Upgrade file from CCO Downloads page for everything. Well I did that
IM&P (CUPS) Server, Blank (Admin Page) page after upgrade from 9.x to 10.5 Read More »
So with the introduction of Cisco Prime Collaboration Deployment, now upgrade any of your UC applications its easier and quicker than before. One of the big advantages that I see with this new product is that the product can have control of the overall infrastructure, starting from VMware all the way to the UC applications.
Upgrade CUCM 9.1 to 10.5 – Procedure (No Prime Collaboration Deployment) Read More »
This one was a very funny one and I’d like to share with you. After an install of a remote office using the following equipment: CIsco 2901 with an ISM for CUE and an AutoAttendant that when the office is open sends the call to a Hunt Group in CUCM and when they are close
Unity Express AA Transfer no Ring-back – Perception is Key! Read More »
In order to organize myself for my lab preparation I need to work on my speed and accuracy, so I created quick and very general Lab outlines, which will be covering CUCM as of now. I created them so that I can guide myself and know where to begin, where to stop and don’t burn
CCIE Collaboration Labs by Technologies Read More »
Just for curiosity, I would like to know how is the people on this group preparing for the CCIE Collaboraiton Lab, right now here is my preparation and roadmap: I have completed a lab in order to be able to study most of the technologies included in the blueprint, here is what I have: 3
How are you preparing for the CCIE Collaboration LAB ? Read More »
Hi there, today I have a customer that wanted to upgrade from CUCM 9.1.2 to 10.5 – which sounds pretty easy… think again, so this is a BE6K deployment where CUCM instance was configured with the recommended OVA from CCO. When starting the upgrade I found that the upgrade didn’t wanted to proceed as expected.
Upgrading CUCM from 9.1.2 to 10.5 – Issues Read More »
